Automatic lock screw machine is a common automatic production equipment, but in the process of use sometimes encounter the card machine situation, so will affect the production efficiency, automatic lock screw machine card machine how to do? We need to understand how this kind of card machine situation is generated, it is definitely a problem in the actual operation of people, or the equipment problem of the machine, so as to reduce the cost.
Automatic locking screw machine picture
First, automatic lock screw machine card machine how to solve
Most of the difficulties of this type of card machine are mainly caused by the defective screws, but the problems of these screws are usually caused by flower heads and slippery teeth, which are caused by two problems.
1, the first is the screw machine itself design scheme construction difficulties, the second is the screw machine manufacturers to solve the above shaped screws and all screw machine channels increase, including the electric driver nose, the electric driver nose diameter is very large is the biggest reason for floating teeth, flower head, this kind of automatic lock screw machine itself key difficulties, so the manufacturer will make this a new category, It also promotes the performance of the automatic locking screw machine.
2, screw quality problems are mainly caused by poor screw quality and modification of the size of the equipment, as well as the equipment itself problems such as the application of raw materials, processing technology and electronic parts of the application of the brand caused by difficulties, so when doing equipment, our central parts are best to choose imported, so as to ensure the stability of the equipment, It also ensures that the brand of the device can do better.
3, if in the operation of the automatic lock screw machine, you find the condition of sliding teeth, you need to check whether the electric torque can be suitable for the current lock screw torque range, propose to use the torque meter to re-test the torque. At the same time, check the screw size, specifications, quality can not be normal.
4, if the automatic lock screw machine is missing nails, then it may be the screw feeder or screw sensor is difficult. At this time, you need to check whether the screw supplier has screws, take the screws by hand to see whether they can work normally, and check whether the screw sensor can light up. If there are screws that do not light up, it indicates that the magnetic induction is abnormal. The multi-axis automatic locking screw machine checks whether the locking height in the process setting in the program can reach the specific positioning position of the screw, and whether the basic parameters of the locking speed can be correct. At the same time, it is also necessary to check whether the locked product can have defects.
I believe that you also understand how to solve the automatic lock screw machine through the above content, in addition, in daily use, pay more attention to maintenance, in fact, you can avoid many problems, so that it will not affect the production of the machine.
Post time: Jul-24-2023