In the pursuit of cost-effective, but also pay attention to product quality, Pusi automation will show you how to choose a good automatic lock screw machine, the following four steps for reference only:
The first step is to check whether it can be screened: in actual production, there may be different shapes of screws such as flying edges, flat heads, and large ones. It is stored in the hopper, if the automatic lock screw machine can automatically filter out a variety of different shapes of screws during operation, under normal circumstances there will be no stuck phenomenon, that is, to meet one of the conditions of the good automatic lock screw machine.
The second step is to check whether it can be refilled: when we finish the first step, the lock screw machine automatically selects the special-shaped screw, and there will inevitably be gaps; If the system can be replenished in time, there will be no gap, which is the second feature of the selected screw machine.
The third step is to check whether there are floating teeth: In order to let a variety of different shapes of screws pass smoothly, some manufacturers have added all the channels in the screw machine. This will cause the nozzle of the electric screw machine to be difficult to align with the screw cross slot, resulting in the floating phenomenon of the lock screw, which will greatly increase the rate of defective products.
Step 4 Check whether the feed is repeated: sometimes the previous one is not locked, and a touch of the signal will transport another screw, that is, double screws. Therefore, choose the automatic lock screw machine, just follow these 4 steps, automatic screening, automatic feeding, whether to float teeth, whether to repeat feeding. If these four steps can be completely passed, then this machine can be called a better automatic lock screw machine.
Post time: Jul-20-2023